Duraclutch R Series Clutch Polaris Ranger 800 6X6 (All Years) / 2009 Ranger 700 4X4

If you are running tires over 32 inches, a clutch kit alone is not enough. You need gear reduction, either internal gears or a portal gear reduction, to handle that much tire without destroying belts and clutches. If you run larger tires and are not sure what you need, email Todd at todd@hunterworks.com before you order and he will tell you what the machine needs.

It fits the Polaris Ranger 800 6X6 in all model years, and the 2009 Ranger 700 4X4 only.

It does not fit the Ranger 800 Full Size — that machine takes DuraClutch kit 15-567. It also does not fit 2005-2009 Ranger 700 models other than the 2009 4X4, which take kit 15-566. Both are sold separately at Hunterworks.

DuraClutch kit 15-574.

A DuraClutch R-Series primary, a TEAM tied secondary, belt, torque stop, belt removal tool, shims, blue Loctite, decals, and instructions.

The R-Series pairs a DuraClutch primary with a TEAM tied secondary. Engagement is smoother than a stock flyweight clutch, engine braking is stronger and more predictable on hills, and the belt stays under tension so it doesn't burn on takeoff. It's a direct bolt-on with no tuning needed.

No. The kit comes calibrated for the machine it's listed for. Bolt it on and ride. If you run oversize tires or ride at high elevation, contact Hunterworks before ordering so Todd can tell you whether a different calibration is a better fit.

You need a primary clutch puller to get the stock primary off the crankshaft. If you don't already own one, choose the 'Add Puller' option and it ships with the kit (often separately, and it usually arrives first).

The kit includes its own DuraClutch belt. DuraClutch systems do not use the stock Polaris belt or a standard Hunterworks belt, so keep a spare DuraClutch belt on hand. Spares are available as an add-on option or as a separate product.

It's a direct bolt-on. Remove the clutch cover, pull the stock primary and secondary, install the DuraClutch primary and secondary with the supplied hardware and Loctite, fit the belt, and reinstall the cover. Hunterworks has a DuraClutch install and road-test video linked on this page.

DuraClutch systems carry the manufacturer's warranty. Full terms are on the DuraClutch warranty page: https://www.duraclutch.com/support/duraclutch-warranty/ The DuraClutch belt itself is not warrantied.