U10 Pro

Everything on this page fits the CF Moto U10 Pro and U10 XL Pro. Drive belts, clutch tools, floor mats, bed mats and accessories, all matched to the machine. If your model or build isn't listed on a product page, check with us before ordering.

Shop by category for this machine

Frequently Asked Questions:

Why are there two different belts listed for the U10 Pro?

One is our CF10GC exclusive and the other is the CF10M, which is listed for the Pro and the XL. Both are made in the USA and cut for this machine rather than trimmed from a generic blank. The fitment on each product page tells you which one matches yours.

What is the secondary belt change tool for?

It opens the secondary far enough to get a belt in or out without taking the primary apart. That's the difference between a trailside swap and a shop job. There's also a clutch holder tool and a spring compressor here if you're going deeper than that, and our YouTube channel walks through the order of operations.

Do I need the primary puller listed here, or will a generic one work?

Use the one listed for the 2025-2026 machines. Pullers aren't universal, since thread pitch and depth vary by clutch, and the wrong one can mark the clutch face before you notice. The puller on this page is made for this primary.

What are the clutch alignment shims used for?

They set the spacing between the primary and the secondary so the belt runs true in the sheaves. They come as a pair. Alignment that's off shows up as uneven wear down one side of the belt, and the clutch help center has articles on how to check it.

Is there anything on this page besides clutch parts?

Yes. Rubber floor mats for the two seat and the XL Crew, a RADTECH bed mat, foam door, underseat and tunnel panel kits, a weatherproof bed cover, sound deadening, a game loader bar, an OEM oil change kit and a 4 inch portal gear lift.